Na'ura mai wanki ta atomatik (TS-MF)
TS-MF jerin atomatik sassa tsaftacewa inji gane ayyuka na ultrasonic tsaftacewa, fesa tsaftacewa, bubbling tsaftacewa da zafi iska bushewa ta cikin wani studio;kayan aiki na iya yin aiki tare da sauran kayan aiki na atomatik don gane rashin kulawa da samar da kwarara.A matsayin tsarin tsaftacewa mai zaman kanta, kayan aiki yana da halaye na ƙananan sawun ƙafa da babban haɗin kai idan aka kwatanta da na'urori masu tsaftacewa na atomatik;saboda tsarin tsaftacewa zai iya gane tacewa ta kan layi, wannan jerin na'urorin tsaftacewa suna da tsabta mai tsabta da kuma tsawon rayuwar sabis na tsaftacewa.ƙwarewa.Kayan zai iya shiga ɗakin ɗakin tsaftacewa da hannu (ko ta atomatik) ta hanyar kayan aiki, an rufe kofa ta atomatik kuma a kulle, injin tsaftacewa ya fara aiki bisa ga shirin da aka saita, kuma kwandon kayan aiki na iya juyawa, lilo ko zama a tsaye yayin tsaftacewa. tsari;ana tsaftace injin tsaftacewa kuma an wanke shi., Bayan bushewa, an buɗe ƙofar ta atomatik, kuma kayan aiki yana da hannu kuma (ko ta atomatik) cire don kammala aikin tsaftacewa.An nuna musamman cewa saboda kwandon kayan kayan wanki yana da aikin juyawa, ya dace musamman don tsaftacewa da bushewa sassan harsashi.
1) Siemens tsarin kula da masana'antu, kayan aiki na goyan bayan gyaran matakai daban-daban na tsaftacewa.Don cimma tsarin tsaftacewa na musamman don sassa daban-daban;
2) Allon taɓawa ba kawai yana samar da saitin sigogi na aiki ba, amma kuma yana nunawa da rikodin bayanan ƙararrawa na kuskuren kayan aiki;
3) Kayan aiki yana sanye da tsarin dumama tsarin ajiyar hankali, SUS304 bakin karfe dumama bututu;
4) Ƙofar hatimi mai aiki tana ɗaukar na'urar rufewa na labyrinth, wanda za'a iya buɗe shi a kwance ko a tsaye, da kuma yanayin manual da yanayin lantarki;
5) The ultrasonic na'urar za a iya sanye take da ultrasonic sanda daga Jamus weber, ko talakawa m transducer.
Tsarin wutar lantarki ya dogara ne akan ƙarfin ƙarfin 12W/ltr
6) Ana amfani da bututun bututun bututun bakin karfe mai girma don tsaftacewa da tsaftace ruwa mai sauri, yana tabbatar da cewa lokacin ciyarwar ruwa ya yi ƙasa da ko daidai da 30sec.
7) 1 ko 2 tankunan ajiya na ruwa za a iya saita su don tsaftacewa da kurkura bisa ga buƙatun tsari
8) An sanye shi da tsarin bushewar iska mai zafi don bushewa sassa bayan tsaftacewa, tare da daidaiton zafin jiki na ± 0.5 ° C.
9) Ana amfani da na'urar juyawa na Servo don juyawa da juyawa a cikin tsarin tsaftacewa na kwandon kayan, tare da daidaitattun daidaito.
10) Gidan kayan aikin tsaftacewa yana kunshe da rami na ciki, Layer insulation Layer da harsashi.An yi amfani da rami mai aiki ta SUS304, 2.5mm, kuma an zana harsashi tare da farantin karfe (ana iya zaɓar SUS304 bakin karfe na anti-yatsa);
11) Sanye take da na'urar tacewa da yawa, gami da kwandon tacewa ta hannu da babban tace bakin karfe;
12) An sanye shi da na'urar raba mai-ruwa mai zaman kanta don maganin slick mai na tsaftataccen matsakaici
13) Kayan aiki yana shiga cikin ruwa ta atomatik, kuma ana nuna matakin ruwa mai aiki a cikin cikakken kewayon;
14) Shigar da na'urar daidaitawa akan gindin injin wanki
15) Hakanan ana iya haɗa nau'ikan nau'ikan injin tsabtace naúrar a cikin layin samarwa mai ƙarfi.
| Samfura | Saukewa: TS-MF300 | Saukewa: TS-MF700 |
| Iyawa | 300ltr (79 galan) | 700ltr (184 galan) |
| Girman kwando | 400×300×300mm (15”×12”×12”) | 700×400×400mm (27”×16”×16”) |
| Ƙarfin famfo | 3.0kw | 5,5kw |
| Matsin famfo | 3-4 bar (43 ~ 58psi) | 3-4 bar (43 ~ 58psi) |
| Gudun famfo | 200ltr/min (44gpm) | 410ltr/min (89gpm) |
| duban dan tayi | 3.0-4.0kw | 7.0-8.0kw |
| Rotary motor iko | 200w | 400w |
| Hazo shaye fan | 370w | 370w |
| ikon bushewa | 12-15 kw | 15-20kw |
Ana amfani da injin tsabtace sassa na atomatik don tsaftace tsari na sassan jirgin sama, sassan mota da kayan masarufi;ya dace da m tsaftacewa daga sassa aiki zuwa gama kayayyakin;a lokaci guda, ana iya haɗa kayan aiki tare da sauran taruka na atomatik don cimma tsaftacewa ta atomatik ba tare da kulawa ba.
Tare da hoto: hoton amfani da kan-site
{kayan haɗi}
