Signal tank ultrasonic cleaner e nang le skimmer ea oli

Tlhaloso

Mochini oa ho hloekisa oa Ultrasonic o entsoe ka ho khetheha bakeng sa ho hloekisa le ho senya mefuta eohle ea likarolo le likarolo tsa indasteri ea Likoloi.E finyella liphello tse babatsehang tsa ho hloekisa mefuteng e mengata ea thepa, haholo-holo likarolong tse rarahaneng, moo li-ultrasound li nang le liphello tse babatsehang ka lebaka la bokhoni ba eona bo phahameng ba ho kenella.Ka hona, liphetho ha u ntse u hloekisa lienjine tsa likoloi lia hlolla, esita le likarolong tse nyane le tse bobebe. Letoto la rona la Likoloi le sebelisa maqhubu a 28 kHz ao ho ona ho fihletsoeng liphetho tse ntle bakeng sa Lekala la Likoloi.

{TS-3600A}

Likaroloana

TS-3600A-1
TS-3600A-2
TS3600A-3

Mesebetsi e ka sehloohong ea thepa e kenyelletsa: ho laola mocheso oa pontšo ea digital, nako ea pontšo ea digital, ho hloekisa ka ultrasonic;thepa e na le li-casters le li-brackets tsa ho fetola tse rapameng, tse ka tsamaisoang habonolo, 'me li na le metsi a kenang ka letsoho, metsi le ho phalla.Bakeng sa mefuta e meng e meholo, ho na le thuso e eketsehileng ea ho bula lemati la pneumatic.Ka mor'a hore ho hloekisoe ho phethoe, bulela ts'ebetso ea ho potoloha ka senotlolo se le seng, 'me sesepa sa oli se qala ho sebetsa ka nako ena, e le hore mokelikeli o ka tanka o ka sebelisoa hape.

Phepelo ea motlakase:
Re sebelisa 3 * 380V bakeng sa phepelo ea motlakase e tloaelehileng ea lisebelisoa, hape re tšehetsa ho etsoa ha lisebelisoa tse ling tse fapaneng tsa matla, tse kang 3 * 220V, joalo-joalo. Ka kopo ela hloko ha u laela thepa.Likarolo tsohle tsa lisebelisoa tsa ho hloekisa tse amanang le metsi li entsoe ka thepa ea SUS304.

a706c433

Ts'ebetso ea skimmer ea oli

Nakong ea ho hloekisa, oli, mafura le litšila tse bobebe li tla nyolohela holim'a metsi.Haeba sena se sa tlosoe, likarolo tse hloekisitsoeng li tla silafala ha li phahamisoa holimo.
Ts'ebetso ea ho thella ka holim'a metsi e hlatsoa bokaholimo ba metsi ka mor'a potoloho e 'ngoe le e' ngoe ea ho hloekisa, pele seroto se ntšoa ka tankeng.Sena se tiisa likarolo tse hloekileng ka ho feletseng ka mor'a potoloho e 'ngoe le e' ngoe ea ho hloekisa.Litšila, oli le mafura a tlositsoeng holimo a bokelloa ka har'a skimmer ea oli moo oli le mafura li tlosoang teng.

Tlhaloso

Bolumo 308 lithara 81 lilithara
Litekanyo (L×W×H) 1460 x 1165 x 860mm 57"x45"x33"
Boholo ba tanka (L×W×H) 1000 x 550 x 560 39"×21"×22"
Boholo bo sebetsang (L×W×H) 915 x 440x 430 36"×20"×16"
Matla a Ultrasonic

3.2 Kw

Maqhubu a Ultrasonic

28KHZ

Matla a futhumatsang

10 kw

Oli skimmer effect

15W

Matla a pompo a potolohang

200W

GW

380KG

Boholo ba Paka (mm)

1560x1350x1080mm

Litaelo

1) Mocheso o akaretsang oa ho sebetsa oa ultrasonic cleaner e ka bang likhato tse 55 (131℉), 'me mocheso oa nako e telele oa ho sebetsa ha oa lokela ho feta likhato tse 75 (167℉);
2) Ho thibetsoe ho bulela mesebetsi ea ultrasonic le ea ho futhumatsa ntle le ho eketsa metsi;
3) Likarolo li hloka ho kenngoa ka tanka ea ho hloekisa bakeng sa ho hloekisa ka basketeng, 'me e ke ke ea kenngoa ka ho toba ka tanka ea ho sebetsa bakeng sa ho hloekisa;
4) Ha likarolo li behoa 'me li ntšoa ka tanka ea ho hloekisa, tima mosebetsi oa ultrasonic pele;
5) Khetho ea ho hloekisa sesepa e lokela ho khotsofatsa 7≦Ph≦13;
6) Sesebelisoa se tsamaeang sa lisebelisoa se sebelisoa feela sebakeng sa ho sisinyeha ha setopo sa tanka ha se se na motho, 'me se ke ke sa sebelisoa ho tlatsa mokelikeli kapa ho hloekisa likarolo khafetsa.

{filimi}

Lisebelisoa

Phello e phahameng ea ho hloekisa le matsete a theko e tlaase a indasteri e le 'ngoe ea lisebelisoa tsa ho hloekisa tsa ultrasonic li ratoa haholo ke bareki.Letoto lena la lisebelisoa tsa ho hloekisa le sebelisoa haholo mabenkeleng a mang a ho lokisa likoloi, lik'hamphani tsa tlhokomelo ea enjene le li-gearbox le lik'hamphani tse ling tsa ho lokisa mechini ea kaho.Ka ho hloekisa ho sebetsa ha mochine ho ka tlisa phello e ntle haholo holim'a tšepe ea alloy aluminium, esita le ho tsosolosa khanya ea holim'a karolo e ncha.E na le phello e hlakileng haholo ho hloekisoeng ha li-deposit tsa carbon ka mekoting ea ho qeta hlooho ea cylinder ea enjene;e boetse e na le phello e hlakileng ea ho hloekisa likarolong tse ling tse nepahetseng haholo ka lebokoseng la gear, joalo ka lipoleiti tsa valve.

{setšoantšo}

图片5

Maemo a kopo

Lihlopha tse tloaelehileng tsa bareki Tlhokomelo ea likoloi, setsi sa grinder se boring, tlhokomelo ea lebokose la gear, indasteri ea ho lokisa bocha.


Nako ea poso: Nov-25-2022