Common fault judgment of ultrasonic cleaning machine

Common fault judgment of ultrasonic equipment

FREQUENTLY ASKED QUESTIONS

Turn on the power switch of the ultrasonic cleaner, and the indicator light is off.

the reason

A. The power switch is damaged and there is no power input;

B. The fuse ACFU is blown.

After turning on the power switch of the ultrasonic cleaner, the indicator light is on, but there is no ultrasonic output.

the reason:

A. The connection plug between the transducer and the ultrasonic power board is loose;

B. The fuse DCFU is blown;

C. Ultrasonic power generator failure;

D. The transducer is malfunctioning.

The DC fuse of the ultrasonic cleaner is blown out.

the reason:

A. The rectifier bridge stack or power tube is burnt;

B. The transducer is malfunctioning.

After turning on the power switch of the ultrasonic cleaning machine, the machine has ultrasonic output, but the cleaning effect is not as ideal.

the reason:

A. Improper level of cleaning fluid in the cleaning tank;

B. The ultrasonic frequency coordination is not adjusted well;

C. The temperature of the liquid in the cleaning tank is too high;

D. Improper selection of cleaning fluid.

Post time: Jun-22-2021